• Moisture Measurement

  • Effects of Particle Size

  • High Effective

FZG,YZG squar and round static vacuum drier

It is well known that vacuum drying is to put raw material into the environment of vacuum for heating and drying. If use vacuum pump to draw air and humidity out, the dry speed will be faster.

It is Suitable for drying of thermal sensitive materials easily resolved. Polymerized or deteriorated under higher temperature and it is wide used in pharmaceutical, chemical, foodstuff and electronic industries.

FEATURE

1.Vacuum dry is to let the raw material to be dried at vacuum condition heating and drying. It used vacuum pump to pump damp and make the working chamber form vacuum status. Therefore the dry speed pf raw material is quickened and the energy is saved greatly.
2.Vacuum dry is divided into static and dynamic drier. Model FZG round vacuum drier or Model FZG square vacuum drier belongs to static drier. Model SZG double cone rotating vacuum drier belongs to dynamic drier. When raw material is dried in static drier, raw material is in static state and its shape can not destroy.
3.Before drying, it can carry out the treatment of disinfection. When raw material is dried in dynamic drier, raw material is turned over ceaselessly. So it can be dried better and more uniformly.
4.In the state of vacuum, the boiling point of raw material will be dropped. Therefore it is suitable for drying raw materials that are unstable or thermal sensitive. The vacuum drier also has good air-tightness. So it is also suitable for drying raw materials that contain strong irritative and toxic gases and the solvent needs to recover.
5.The vacuum drier has been wide used for pharmaceutical industry, chemical industry, foodstuff industry, dyestuff industry and so on. Air is in conformity with the requirements of GMP.

DATA SHEET

 

Model FZG-10 FZG-15 FZG-20
inner size of drying chamber φ1500*1060*1220mm φ1500*1400*1220mm φ1500*1800*1220mm
outer size of drying chamber 1924*1720*1513mm 1513*1924*2060mm 1924*2500*1513mm
layers of baking support 5 8 10
interval 122mm 122mm 122mm
size of baking tray 460*640*45mm 460*640*45mm 460*640*45mm
quantity of baking 20 32 60
working pressure inside the pipe of bakingsupport ≤0.784Mpa ≤0.784Mpa ≤0.784Mpa
operation temperature of baking support 35-150℃ 35-150℃ 35-150℃
degree of vacuum inside the chamber when operation indle —0.1Pa —0.1Pa —0.1Pa
under the condition of-0.1Mpa and 110,evaporation rate of wate 7.2kg/㎡.hr 7.2kg/㎡.hr 7.2kg/㎡.hr
when condensor is used,Model 2X-70A 2X-70A 2X-90A
when condensor is used power of vacuumpump 5.5kw 5.5kw 5.5kw
when condensor is notused,Model SZ-2 SZ-2 SZ-2
when condensor is notused power of vacuumpump 4kw 4kw 5.5kw
Weight of drying chamber 1400kg 1400kg 3200kg

 

CONTACT

                                                   Get in touch with an expert

We´re looking forward to find the suitable solution for your product. Please contact:

Andrew Yang
Engineer Director 
Phone: +86 189 7157 0951

E-mail

RELATED PRODUCTS

Scroll to Top