All Sizes of Capsule Available
High Productivity & Fully Automatic
High Efficient & GMP Standard
Want A Free Consultation
NJP-260 Liquid Automatic Capsule Filling Machine
It can pack oily liquid, solution, suspension liquid or paste, etc. This machine adopts automatic frequency control of motor speed, convenient and intuitive operation. The machine as the new century a new convenient dosing filling way and the idea is the ideal equipment in the pharmaceutical, food, health care products industry.
FEATURE
1. Small volume, low energy consumption, fast mould change, convenient operating ,easy cleaning. High transmissionits, small vibration, low nosie
2. The rate of capsule filling is>99%.
3. The turning-around parts are in full closure, having excellent lubricating conditions. No oil dirt on the working bench, avoid the cross pollution with the medicine.
4. Shelter are fixed around the dose pan, which can recycle the powder, reduce the dust on working bench.
5. Adopt the man-machine interface, including PLC programming controller, appear the capacity of per minutes, total output, dynamic empty capsules and medicine powder condition, alarm for capsules lacking, and automatically stop for lacking of medicine powder, breakdown diagnosing display.
DATA SHEET
|
Item |
NJP-260 liquid capsule filling machine JP-260 Closed Full-Automatic Capsule Filling Machine |
|
Weight |
900kg |
|
Overall size |
1020×860×1970mm |
|
Motor power |
5.75kw |
|
Power |
AC 220V/380V; 50Hz/60Hz |
|
Max Capacity |
260pcs/minute |
|
Capsule size |
00#~5# |
|
Load difference |
≥99.5% |
|
Noise |
≤75dBA |
|
Filling amount difference |
Liquid: above 300mg ≤ ±3% |
|
Compressed air |
0.06m3/min 0.3Mpa |
|
Water source requirement |
The water recycle vacuum pump is equipped with a water tank for recycle using, and can also be connected to an external water source. |
|
Vacuum degree |
-0.02~-0.06 MPa |
|
Water flow |
250L/h |
|
Inlet pipe inner diameter |
20mm |
|
Drain pipe inner diameter |
27mm |
|
Working temperature |
21℃±3℃ |
|
Working plant height requirement |
Manual materials load ≥2.6m, |
|
Working environment relative humidity |
40~55% |
|
Exhaust volume |
300m3/h |
|
Control System |
Variable frequency stepless speed regulation, PLC control |
VIDEO
CONTACT
Get in touch with an expert
We´re looking forward to find the suitable solution for your product. Please contact:
Andrew Yang
Engineer Director
Phone: +86 189 7157 0951
