High speed industrial automatic conveyor
No internal parts to adjust or maintain
Vertical shaft removal reduces building size requirements

DW Series Vegetables Bag For Noodles Continuous Mesh Belt Dryer

AIPAK DW series mesh belt dryer is suitable for elephant grass, alfalfa grass, tree feed, barley straw, oat straw, rye straw, straw, sorghum straw, corn straw, potato vines, bean stalk drying and other forage feed drying. The mesh belt forage dryer is mainly used to prolong the storage period of forage (forage, straw and other green feed), avoid the poisoning of feeding livestock, and preserve the nutritional value of forage (forage, straw and other green feed). The forage water content can be reduced from 45-75% to 14-18%, which can be adjusted flexibly.

DW Series Mesh Belt Dryer Working Principle

The mesh belt dryer works by the materials that to be dried are distributed on the conveyor belt by feeding device. Conveyor belt will go through the channel that consists of one or several heating units. Each heating unit is equipped with air heating system and circulation system. And Each channel has one or several dehumidifying system. When the conveyor belt goes through it, hot air will pass though the material that on the belt from up to down or from down to up so that the material can be dried uniformly. Heating source can be steam, heat transfer oil, flue-gas or electricity. Fan is used for heat convection and transferring heat to material, and fresh air is supplied and damp air is exhausted. In the drying time cabinet, proper relative temperature and humidity can be kept.

DW Series Mesh Belt Dryer Application

De-watering vegetables,particle feed,gourmet powder,fine coconut mash,organic plastics,compound rubber,acral fibre,medicine product,medicine material,small wooden product,plastic product,aging and solidification for the electronic components and devices.

FEATURE

1.The feed dryer has strong overload resistance capacity, large processing capacity, less fuel consumption, low drying cost;

2.The operating parameters can be changed according to the different properties of the material, so that the material in the box can form a stable comprehensive turning material, the mass and heat exchange is more sufficient, and the drying is more uniform;

3.The new feeding, discharging device, to eliminate the belt dryer feeding blockage, discontinuous, uneven and return material phenomenon, reduce the load of the dust removal system;

4.The new internal structure strengthens the cleaning and heat conduction of the dispersed materials, eliminates the adhesion phenomenon of the conveyor belt, and has a stronger adaptability to the moisture and viscosity of the materials.

DATA SHEET

Type	DW-1.2-8	DW-1.2-10	DW-1.6-8	DW-1.6-10	DW-2-8	DW-2-10
unit number	4	5	5	5	4	5
belt width (m)	1.2	1.2	1.6	1.6	2	2
length of drying section (m)	8	10	8	10	8	10
thickness of the material to be covered (mm)	1080
temperature (ºC)	60-150
steam pressure(Mpa)	0.2-0.8
steam consumption(Kg/h)	120-300	150-375	150-375	170470	180500	225600
drying time (h)	0.2-1.2	0.25-1.5	0.2-1.2	0.25-1.5	0.2-1.2	0.251.5
drying efficiency (Kg H2O/h)	60-160	80-220	75-220	95 250	100-260	120-300
total power of the blower (kw)	6.6	8.8	9	12	12	16
total power of the equipment (kw)	7.15	9.55	9.55	12.75	12.55	16.75