NJP-260 Liquid Automatic Capsule Filling Machine

NJP-260 Liquid Automatic Capsule Filling Machine

NJP-260 LIQUID AUTOMATIC CAPSULE FILLING MACHINE, IMPORTED LIQUID PUMP AND SERVO FEED SYSTEM AND THE CLOSED DIE WHEEL DESIGN, ENSURE THE FILLING QUANTITY .

BRIEF

It can pack oily liquid, solution, suspension liquid or paste, etc. This machine adopts automatic frequency control of motor speed, convenient and intuitive operation. The machine as the new century a new convenient dosing filling way and the idea, is the ideal equipment in the pharmaceutical, food, health care products industry.


FEATURE

1. Small volume, low energy consumption, fast mould change, convenient operating ,easy cleaning. High transmissionits, small vibration, low nosie
2. The rate of capsule filling is>99%.
3. The turning-around parts are in full closure, having excellent lubricating conditions. No oil dirt on the working bench, avoid the cross pollution with the medicine.
4. Shelter are fixed around the dose pan, which can recycle the powder, reduce the dust on working bench.
5. Adopt the man-machine interface, including PLC programming controller, appear the capacity of per minutes, total output, dynamic empty capsules and medicine powder condition, alarm for capsules lacking, and automatically stop for lacking of medicine powder, breakdown diagnosing display.



TECHNICAL PARAMETER

Item

NJP-260 liquid capsule filling machine JP-260 Closed Full-Automatic Capsule Filling Machine

Weight

900kg

Overall size

1020×860×1970mm

Motor power

5.75kw

Power

AC 220V/380V; 50Hz/60Hz
Three-phase four-wire AC 380V;50Hz

Max Capacity

260pcs/minute

Capsule size

00#~5#
Supro/safefy capsule size:A~E

Load difference

≥99.5%

Noise

≤75dBA

Filling amount difference

Liquid: above 300mg ≤ ±3%

Compressed air

0.06m3/min 0.3Mpa

Water source requirement

The water recycle vacuum pump is equipped with a water tank for recycle using, and can also be connected to an external water source.

Vacuum degree

-0.02~-0.06 MPa

Water flow

250L/h

Inlet pipe inner diameter

20mm

Drain pipe inner diameter

27mm

Working temperature

21℃±3℃

Working plant height requirement

Manual materials load ≥2.6m,
Automatic materials vacuum convey≥2.8m

Working environment relative humidity

40~55%

Exhaust volume

300m3/h

Control System

Variable frequency stepless speed regulation, PLC control


RELATED BLOGS